• (+91) 9094042742, (+91) 9094042743.

  • Mon-Sat : 9:30-18:30





Temperature & Humidity Displays

The places where it is necessary to maintain the humidity and temperature, Temperature & Humidity Displays possess a great usage there. It is equipped with a sensor which allows its RTU to get placed in every zone.The data of the temperature and humidity is read with the help of the sensor of Temperature & Humidity Displays after fixed interval and stores. Interestingly the stored data can be sent to the server unit on special request.
The system software of the Temperature & Humidity Displays install in the server PC so that data regarding the temperature and humidity can be easily obtained from different zones and regions.
Meticulous design and development is done to the protocol of Temperature & Humidity Displays for assuring the sharing of the accurate and similar data as per of the regions and zones. However, the accepted data gets stored in the system and popped up on the screen at an interval of every 4 seconds.
Actually there is a temporary database where the accepted data gets stored. The main PC server of the Temperature & Humidity Displays features 32 inches LCD monitor to check the humidity cum temperature of varied zones and regions with the help of the temporary database.After an hour interval, the data in the temporary database gets transferred into the main or permanent data base in the averaged form. Only the designated and remote users of the Temperature & Humidity Displays can get full access to the main data base.
In the Temperature & Humidity Displays both maximum and minimum threshold limitation setup facilities are offered to the user. In case, it exceeds the set limits, then a red color indication will get highlighted on the screen. At that time, the software automatically sends SMS and email to 5 contact numbers and email IDs of the concerned persons respectively alarming them to take immediate action on it.



Product Title

DAS System


Temperature & Humidity Monitor

This system is used in the locations where the temperature and humidity has to be maintained accurately.

This RTU can be placed each zones with the sensor. It will read the Temperature and humidity data from the sensor unit at proper interval and stores. The stored data can be sending to the server unit on request.

Specification

  • Input Signal : Temperature and Humidity Senso
  • Supply Voltage: 12V, DC
  • LED indication : Data transfer
  • Type of enclosure: Aluminum
Temperature and Humidity sensor



System Software:

Data Base Management

Reports

Threshold setting

E-Mail Alert

SMS Alert.

Remote monitoring - Client Software

System software will be installed in server PC to receive the data from various zones. Since the reading which is received from the various zones should be at same time. The protocol is designed and developed to assure that, same time data. But the received values will stored in the system and displayed on front screen at 4 sec interval.



Features

  • 2 sensors for relative humidity & temperature
  • Precise dew point calculation possible
  • Measurement range: 0-100% RH
  • Absolute RH accuracy: +/- 3% RH (20-80% RH)
  • Repeatability RH: +/- 0.1% RH
  • Temp. accuracy: +/- 0.4°C @ 25°C
  • Calibrated & digital output (2-wire interface)
  • Fast response time < 8 seconds
  • Low power consumption (typ. 30 µW)
  • High precision sensor

The received data will be addressed and stored in the temporary database. The server PC has Display device (32” LCD Monitor) to display temperature cum Humidity at various zones from temporary database. At every one hour interval, the one hour data from temporary data base will be averaged and stored in the main data base. The remote user can be accessed main data base only


User can set the minimum and maximum threshold limits for Temperature and Humidity. If the Temperature and Humidity beyond the limits, it will get highlighted on the screen by showing red color. At the same time, this software sends a mail to five email IDs & send SMS to five mobile numbers and the concern person can take immediate action on it.


Application:-

Data Centre in IT Sector.

Control Room in Substation.

In Textile Industries.



Product Title

Indicator

An item which can display time, temperature and humidity is really useful in places where environmental changes are constantly monitored. They are used in Pharmaceuticals industries, semiconductor manufacturing industries, Research and Development, Labs, etc.

It can be of varying sizes depending on the customer requirements. The Temperature and humidity can be calibrated to a standard meter. It can be updated either using Keypad or Remote.

Specification

  • Time display in HH:MM / HH:MM:SS format
  • Temperature display in XX.X Degree C
  • Humidity display in XX.X % RH
  • Operating range Temperature -40~80Celsius Accuracy
  • Operating range Humidity 0-100%RH
  • Accuracy Temperature 0.1Celsius
  • Accuracy Humidity +-2%RH(Max +-5%RH)
  • Repeatability Temperature +-0.2Celsius
  • Repeatability Humidity +-1%RH
  • Sensing period Average: 2s
  • Installation: Wall mounting/Hanging
  • Display Size: 2” and 4” Seven Segment/LED Dot Matrix
  • Display Size: 2” and 4” Seven Segment/LED Dot
  • Color: Red and Green
  • Case:Powder coated Metal
  • Power Supply:100 to 270V AC